18
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
The engine does
not start.
No fuel in tank.
Add fuel.
Fuel valve is set to OFF
Set the fuel valve to ON
Engine switch is in the
OFF position.
Set engine switch to the ON
position.
Lack of spark at the
spark plug.
Make sure that the spark plug
cover is fitted on to the plug.
With the engine switch in the ON
position, hold the spark plug
electrode against the engine and
pull the starter cord. If a spark is
present but engine will not start,
consult your CLARKE dealer.
The engine stops
and will not
restart.
No fuel in tank.
Add fuel to the tank.
The pump fails to
prime.
Priming chamber not
filled correctly.
Fill priming chamber leaving no
air gap.
Air leaking due to
damaged hose,
broken hose clamps,
split/ill-fitting gasket.
Repair as necessary.
Blocked inlet hose.
Clean strainer and make sure that
it is not submerged in mud or
sediment. Make sure that there
are no kinks in the delivery hose.
Engine speed too low.
Increase engine speed.
Damaged impeller.
Disassemble the pump and
replace the impeller.
Air leaking through
damaged seal.
Replace seal.
Содержание 7230166
Страница 24: ......