13
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
FAULT FINDING
SYMPTOM
PROBLEM
SOLUTION
Heater does not
operate, although
plugged in and
switched on.
Plug is loose/bad
connection.
Remove the plug & check
the connection of the plug
and socket.
Fuse blown.
Replace if necessary and
investigate the cause. If
fuse blow repeatedly,
consult your Clarke dealer.
No power at socket
outlet.
Insert plug into a suitable
socket.
Tilt safety switch is
disabling unit.
Ensure unit is upright. If
switch does not re-set,
consult your Clarke dealer.
Heater tube is glowing
hot.
Input voltage incorrect. Ensure power supply
matches the rating on the
label.
Air supply obstructed.
Ensure the heater is kept
away from any objects or
materials which could
obstruct the flow of air.
Heater does not
respond to remote
controller.
Batteries defective.
Replace batteries.
Controller is out of
range or not pointing
at the display panel.
Move closer or try different
angles of pointing the
controller at the heater.
Содержание 6926018
Страница 16: ......
