10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
• SUN will flash repeatedly.
3. Use the left and right arrow buttons to choose a day.
4. Press the TIME button to go to the next step.
• The first 2 digits (HOUR) of the time display will flash.
5. Use the + and - buttons to scroll to the correct time (24 hr clock).
6. Press the TIME button to set the Minutes.
7. Use the + and - buttons to scroll to the minutes you require.
8. Press the TIME button to finish the time and day set up.
• The current time and day will show as a constant when the WEEK
TIMER is activated.
NOTE:
The Time and Day setting will be lost and will need to be reset.
Once the heater is powered off completely, (either from the
power switch or wall supply) Follow steps 1 to 8 to reset the clock.
THE WEEK TIMER
• The Week Timer covers a 7 day week (Monday to Sunday). You can
program up to 3 individual “on/off” cycles each day.
• Each heating period can be set for a maximum of 24 hours in 10
minute increments. It is not possible for the program to span two
consecutive days e.g. Monday 10pm to Tuesday 2am.
If the user requires the heater to operate over the midnight period
they would have to set two programs, one for Monday and one for
Tuesday.
• The user can then also set two further programs for Tuesday if
required.
• Always ensure that the heating elements are switched to the ON
position when in Timer mode.
SETTING THE WEEK TIMER
SETTING THE DAY AND PROGRAM
1. Press the WEEK TIMER button on the remote control.
• Monday will start to flash.
2. Press the left and right arrow keys to select the day you want your program
to start and press the WEEK TIMER button to confirm.
• Program 1 [01] will now flash.
3. Use the + and - buttons to select the program you want to set and press the
WEEK TIMER button to confirm.
Содержание 6926013
Страница 16: ......
