Clarke 6500682, Инструкция по эксплуатации и обслуживанию

Страница: 9 / 20

9
UNPACKING & ASSEMBLY
When unpacking, check for damage or omissions etc. Any found should be
reported to your CLARKE dealer where the lathe was originally purchased. Do
not discard the packaging until the lathe is assembled.
WARNING: DUE TO THE WEIGHT OF THE LATHE ASSEMBLY, IT IS ESSENTIAL
THAT TWO PEOPLE PERFORM THE UNPACKING, ASSEMBLY AND
POSITIONING.
The numbers in the following assembly instructions refer to the parts lists and
diagrams on pages 15-18.
The following items are supplied loose:
1 x Lathe c/w Adjustable Tailstock
1 x Tool Rest
1 x Tool Rest Holder
1 x Face Plate
1 x Headstock Centre Spur
1 x Tailstock Spur Assembly
2 x Open Wrenches
1 x Fixings Pack
4 x Stand Legs
2 x Stand Long Supports
2 x Stand Short Supports
2 x Stand Top Plates
1 x Stand Shelf Plate
1 x Instruction Manual (this document)