9
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ASSEMBLY
1. Fit the tailstock centre cup into
the tail axis.
NOTE:
To detach the tailstock
centre cup, place the drift
rod into the adjusting wheel
as far as it goes and give it a
tap.
2. Fit the tool rest into the tool rest
base. Adjust to the required
height and position using the rest
locking handle and base locking
handle.
3. Install the headstock faceplate by
screwing it onto the headstock
spindle, using the drift rod as a
counter lever. Lock the faceplate
into place using the 2 x 3mm hex
grub screws.
NOTE:
The faceplate has 4 screw
holes evenly spaced. these
are for securing workpieces
that do not require the
tailstock for support.
