Unpack the Sander and lay out the components, checking to ensure that no
damage was suffered during transit. Any damage should be reported to your
Clarke dealer immediately.
Loose items are as follows, referring to the illustration above:
A:
1 x Disk Sanding Table
B:
1 x Belt Sanding Table
C:
1 x Mitre Gauge
D:
1 x Sand Disk Cover/Dust Extraction Port
E:
2 x Disk Sanding Table Locking Levers
F:
1 x Vertical Sanding Table Locking Lever
G:
3 x Flat Washers (for use with Locking Levers)
H:
4 x Rubber Feet
J:
2 x Allen Keys
Pre-Assembly Check
7
WARNING:
The use of any accessory/attachment, other than those
recommended in this instruction manual, may present a risk of
personal injury.
Содержание 6500403
Страница 13: ...Parts Diagram 13...
