manualshive.com logo in svg

Clarke 6500101, Инструкция по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Clarke 6500101 Скачать руководство пользователя страница 9

9

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

5. Open the drill chuck jaws and 

lower the chuck onto the notcher 
spindle, aligning the chuck jaws 
with the flat sides of the notcher 
spindle. Tighten the chuck jaws to 
secure.

NOTE: 

Failure to align the spindle 

flats properly with the chuck 
jaws may result in the spindle 
coming loose and 
damaging the notcher and 
drill chuck.

6. Adjust the base of the notcher until it is flat to the drill press table, then 

tighten the hex bolts from step 2.

7. Secure the base to the table with 

bolts, strap clamps or “C” clamps.

8. Remove the spindle lock pin, then 

rotate the drill chuck by hand to 
test how easily the assembly turns.

NOTE: 

If assembly turns with minimal 

effort, proceed to step 10.

NOTE: 

If assembly does not turn with 

minimal effort, proceed to 
step 9.

9. Loosen the 2 hex bolts securing the notcher base to the frame, rotate 

spindle then tighten hex bolts, then repeat step 8. repeat until assembly 
turns with minimal effort.

10. Loosen bolts/clamps, securing the notcher to the drill press table, rotate 

spindle, then tighten the bolts/clamps. Spindle should turn freely.

11. When the notcher is correctly 

installed on the drill press, remove 
the spindle lock pin, apply cutting 
fluid, turn drill press on and 
perform notching operation.

Содержание 6500101













Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды