manualshive.com logo in svg

Clarke 6487010, Инструкция по эксплуатации и техническому обслуживанию, Страница: 12 / 16

Поделиться
Скачать
Clarke 6487010 Скачать руководство пользователя страница 12

12

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

SCREWDRIVING TIPS

• Make sure that the screwdriver bit is inserted straight and upright in 

the screw head, or the screw may be damaged.

• When driving wood screws, pre-drill pilot holes to make driving easier 

and to prevent splitting the material.

• Select the forward direction to drive screws in and reverse direction 

to take them out.

MAINTENANCE AND SERVICING

• After use, remove the drill or screwdriver bit, open the chuck jaws 

and tap the side of the chuck to remove any dust, or chippings etc.

• Keep the cooling vents clear.

• Clean the motor housing with a soft cloth.

• Keep the handle clean and free from oil and grease.

• Keep the charger clean and free from dust and grease.

• Worn or damaged parts must be replaced by qualified personnel.

• There are no user serviceable parts inside the drill. 

REMOVING THE CHUCK

1. Open the jaws as far as possible. 

2. Using a cross head screwdriver (inserted, down through the jaws), remove 

the securing screw. The screw has a 

LEFT HAND THREAD

 and must therefore 

be turned 

CLOCKWISE

. 

• Grasp the chuck and unscrew it from the drill in the normal manner, 

i.e. by screwing it anticlockwise.

WARNING: ALWAYS REMEMBER TO POSITION THE DIRECTION CONTROL 
SWITCH IN THE CENTRAL LOCKED OFF POSITION AND REMOVE THE 
BATTERY PACK, BEFORE CLEANING THE DRILL. 

Содержание 6487010

















Отзывы:

Нет отзывов