Clarke 6480280, Инструкция по эксплуатации и техническому обслуживанию

Страница: 9 / 12

9
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
LOOSENING A NUT
1. Place the socket over the nut or
bolt head and squeeze the
trigger.
• The nut/bolt will be hit again
and again until it is loosened.
IMPORTANT: Release the trigger when
the nut starts to loosen.
TIGHTENING A NUT
1. Start the nut or bolt by hand to
make sure that it is not cross
threaded.
2. Place the socket over the nut or
bolt head and squeeze the
trigger.
3. ALWAYS finish tightening with a
torque wrench or suitable
spanner.
MAINTENANCE AND SERVICING
STORAGE
1. Make sure that the impact wrench is stored in the supplied case in a clean,
dry place, out of reach of children when not in use.
CLEANING
1. Make sure that all air vents are clear, (wearing eye protection, use
compressed air to clean the impact wrench if possible.
2. Do not use solvents to clean plastic parts, most plastics are damaged by
solvents.
GENERAL MAINTENANCE
1. Refer to your CLARKE dealer if internal maintenance is necessary.
2. Make sure that the power cable is free from cracks, bare wires etc.
3. If it is necessary to replace the power cable, this must be done by the
manufacturer.