12
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
STARTING & STOPPING
1. To start the saw, squeeze the
trigger.
2. Maintain the saw at a constant
speed by pressing in the lock
button.
• You can then release your
finger pressure on the trigger.
3. To stop the saw if the lock button is
used, squeeze the trigger fully in,
then release it and the motor will
stop. Always switch off before unplugging.
USING THE SAW
1. Place the shoe fully against the
work-piece and squeeze the
trigger to run the saw before
letting the blade touch the cut
line on the work piece. To make
your cut, move the saw slowly
along the cutting line.
2. Take care not to allow the saw to
bounce on the workpiece. Ensure
the shoe remains in contact with
the workpiece.
3. Always hold the saw with both hands on the body and handle.
4. Take extra care when cutting curves - move slowly to avoid stress on the
blade.
5. Avoid putting unnecessary pressure on the blade and avoid applying
lateral pressure. Let the blade work naturally.
6. Never try to start the saw if the blade becomes jammed in the workpiece.
7. If the blade becomes blunt in one section of its cutting edge, reposition the
shoe to utilise a sharper, unused portion of the blade. Page 10 shows the
adjustable shoe which can be positioned close to the blade holder and
then extended to optimise the use of the blade & extend its useful life.
Содержание 6462554
Страница 20: ......
