Assembly
Before assembling the sander/polisher, check for missing
parts and or damage caused in transit. Any defects
must be reported to the Clarke dealer where the tool
was originally purchased as soon as possible.
IMPORTANT:
Before carrying out any adjustments or
repairs, ensure the sander/polisher is isolated from the
main electric supply by switching off and
removing the plug from the socket.
Fitting Handles
The handles can be fitted for either left or
right handed use, it is also possible to fit one or
both handles, depending on individual
choice.
1
‘D’ Handle Only
Slot the ‘D’ handle onto the body of the tool
see Fig. 2.
NOTE: the handle is recessed to fit onto the tool in one position only, and is not adjustable,
other than for left or right handed use.
D Shaped Boss
Overview
‘D’ Handle
Speed Control
Trigger Lock
Trigger
Motor Brush
Side Handle
Backing Pad
Polishing Hood
Spindle Lock
Fig. 1
Fig. 2
-5-