6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
7. Never use bent or cracked blades. (Replacement blades are available
from your Clarke dealer.
8. Replace table insert if the slot has become enlarged.
9. When cutting wood, ensure all nails or fastenings have been removed
beforehand. Nails will damage the saw blade.
10. When cutting boards in an upright position use a suitable push block to
prevent kickbacks.
11. When cutting round timber stock, use a suitable jig or fixture to keep the
work from turning.
12. Always ensure the blade is fully tightened and correctly adjusted before
use.
13. Keep the mains cable well away from the machine and ensure an
adequate electrical supply is close at hand so that the operation is not
restricted by the length of the cable.
14. Switch the machine off immediately the task is completed.
SAFETY SYMBOLS
The following safety symbols may be found on the machine.
Wear a dust mask
Wear eye protection
Read instruction manual before use
