10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ADJUSTING THE GUIDE SHOE
WARNING: ALWAYS ENSURE THE SAW IS
DISCONNECTED FROM THE POWER
SUPPLY BEFORE MAKING ADJUSTMENTS.
1. To adjust the shoe, unlock by
releasing the locking lever on the
side of the saw. Adjust the shoe to
the desired position and then
push the locking lever back into
position.
• Note that the shoe can slide
fully in and out of the saw body.
2. The head of the shoe will adapt to the surface of the workpiece you are
working on with an inclination of up to 30
o
.
ADJUSTING THE HANDLE
The handle can be rotated 90
o
left or
right of centre so as to give a better
angle of attack on the workpiece
.
1. Slide handle locking switch back.
2. Rotate handle 90
o
left or right,
depending on angle of attack
needed.
Содержание 6459020
Страница 20: ......
