4
• Ensure the battery posts and battery clamps are
perfectly clean before use.
• Disconnect from the mains power supply before
making or breaking connections to the battery.
• Make sure the battery is topped up with distilled
water, (where applicable), to its proper level, before
connecting the charger.
• Unscrew the battery filler caps fully, (where
applicable), and leave them loose for the duration of
charge, to ensure that gases are allowed to escape.
NOTE:
ALWAYS clean around the filler caps
thoroughly before unscrewing, to ensure
that no dirt can enter the battery cell.
Ensure the breather holes, in the caps, are
perfectly clear before screwing in again.
• When charging is complete, disconnect the negative
cable first and then the positive cable.
• Always place the charger in an environment which is
- well ventilated
- out of the reach of children
- not exposed to direct sunlight or heat source
- away from water / moisture, oil and grease
- away from explosive gases, flames, and sparks
- away from any flammable substance