Clarke 4500365, Инструкция по эксплуатации и техническому обслуживанию

Страница: 4 / 13

4
Parts & Service: 020 8988 7400
BATTERY REPLACEMENT
When the display constantly flashes the battery
requires replacement.
Slide off the battery compartment cover and insert a
new battery with the positive (+) side facing up.
SETUP AND OPERATION
• Loosen the slide clamp screw.
• Press the ON button to switch the calipers on,
select the required measuring unit by pressing
the inch/mm mode switch.
ZERO YOUR CALIPERS
It’s critical to zero your calipers before taking any
measurements. If you skip this step, your subsequent
measurements may not be accurate.
1. Close the calipers fully.
2. Press the ON/Zero button to set it to zero. The
display reads 0.000”