Clarke 3503594 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 12

Clarke 3503594 Скачать руководство пользователя страница 3

3

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

GENERAL SAFETY WARNINGS

DO NOT

use this product in environments for which it is not Intended (i.e.

extreme cold, high winds, extreme heat, heavy rainfall, etc).

DO NOT

use open flames or cooking or heating devices inside or in close

proximity to the garage including all types of stoves, gas heaters, gas lanterns,
electric heaters, torches, fly killers, etc. The fabric will burn if left in continuous
contact with a naked flame.

DO NOT

store flammable liquids (petrol, kerosene, propane, etc.) in the

garage or operate gas powered vehicles/equipment in or around the
garage.

ALWAYS

follow the following instructions for mounting the garage.

Due to the height of this garage, an aerial platform or cherry picker will be
useful and safer than using ladders. Ensure that any such platforms or ladders
are operated on level ground.

We advise that 4 to 6 people may be required to safely erect the frame and
install the cover owing to the size and weight.

Select a calm day to install the cover due to the high windage of the cover
both during fitting and before it is totally secured in position.

POSITIONING AND INSTALLATION OF THE GARAGE

POSITIONING THE GARAGE

This garage is a temporary structure and is not recommended as a permanent
building. It is designed to offer protection from sun, rain, light snow, tree sap
and bird droppings etc. It is not designed to shelter equipment from
excessively high winds or heavy snow.

Choose your garage location carefully. Check for overhead power lines, tree
branches, etc.

DO NOT

install near roofs or other structures that may shed snow,

ice or excessive run-off onto your garage.

SITING THE GARAGE

Erect your garage on level ground over a firm, level area. Allow enough
space near each corner for the tie-down straps supplied to be used as

WARNING: READ THESE SAFETY INSTRUCTIONS TO REDUCE THE RISK OF
INJURY. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.

«
1
2
3
4
5
...
»

Содержание 3503594













Отзывы:

Нет отзывов