5
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SIZE OF THE LOGS BEING SPLIT
The image on the right shows the maximum log size that
can be split.
• It is important not to attempt to split a log for
longer than 5 seconds as the pump may be
damaged by the oil overheating. This could occur
when the wood being split is excessively fibrous,
knotty or wet, green wood.
NOTE:
The diameter of the log is indicative: i.e. A small
log can be difficult to split if it has knots or a particularly tough fibre.
• It is therefore better to stop and rotate the log by 90
O
to see whether it can
be split in a different plane.
• Not being able to split the log within 5 seconds, indicates that its hardness
exceeds the capacity of the machine and it should therefore be discarded
so as not to cause damage/injury.
•
Do not try to hit any jammed logs
off of the log splitter, this may
damage the machine or may
cause the log to fly up and cause
an accident.
MOVING THE LOG SPLITTER
• Lift the front of the log splitter by the handle and move the log
splitter around the working area.
CAUTION: BEFORE MOVING THE LOG SPLITTER, MAKE SURE THE BLEED
SCREW IS TIGHTENED TO AVOID OIL LEAKING.
350mm
520mm
Содержание 3402042
Страница 24: ......
