Clarke 3400862, Инструкция по эксплуатации и техническому обслуживанию

Страница: 8 / 16

8
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
8. Attach the motor and gearbox
assembly to the main frame, by
passing the four studs through
their holes in the main frame,
(ensuring the on/off switch
assembly is at the top, with the
machine the correct way up) and
secure with nuts and washers from
the fixing kit.
9. Tighten all the nuts fully.
10. Mount the mixing drum assembly
onto the gearbox shaft by
screwing it onto the thread of the
gearbox drive shaft.
• An assistant may be helpful in
doing this.
11. Check all components including
nuts, bolts and pins are secure.
12. Assemble the stand by sliding the
locating pins through the stand
connector and each pair of legs.
Fasten in place with the short R-
clips provided.
• Locate the Tilt/Swivel unit onto
the stand and secure with the
bolt provided. Do not over-
tighten as this needs to move
freely.
• The assistance of another person will be required to do this.
CAUTION: OWING TO THE WEIGHT OF THE MACHINE, TWO PEOPLE WILL
BE REQUIRED TO LIFT THE MIXER UPRIGHT.