background image

4

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

5. Before further use of the tool, it should be carefully checked to determine 

that it will operate properly and perform its intended function. Check for 
alignment of moving parts, binding of moving parts, breakage of parts, 
mountings or other condition that may affect its operation. 

6. Have defective switches repaired by an authorised service centre. Do not 

use a power tool if the switch does not turn it on and off.

7. Always check for any damage or any condition that could affect the 

operation of the tool. Damaged parts should be properly repaired.

8. Have your tool repaired by a qualified person. This tool complies with the 

relevant safety rules. Repairs should only be carried out by qualified 
persons using original spare parts, otherwise this may result in considerable 
danger to the user.

9. Never use this product for any other purpose than that described in this 

booklet.

10. Never abuse the power cable by yanking the cable to disconnect it from 

the socket. Keep the cable away from heat, oil or sharp edges.

11. Guard against electric shock. Avoid body contact with earthed or 

grounded surfaces.

12. If the tool should be used outdoors, use only extension cables intended for 

outdoor use and marked accordingly.

13. Avoid accidental starting by making sure the power switch is off before 

plugging in the power cable.

ADDITIONAL SAFETY RULES FOR HOT AIR GUNS

1. Always keep the mains cable well away from the hot air gun, particularly if 

laying it down temporarily during use. 

2. Always switch the hot air gun OFF after use and allow it to cool before 

storing. Support on its stand with the nozzle pointing upwards.

3. Never leave the hot air gun unattended when it is switched on.

4. Always wear safety gloves and never touch the hot nozzle.

5. Never point the hot air gun at any person or animal.

6. Never use in a flammable atmosphere, e.g. where solvent vapours are 

present.

CAUTION: WITH ALL MACHINES, THERE ARE CERTAIN HAZARDS 
INVOLVED WITH THEIR OPERATION AND USE. EXERCISING RESPECT AND 
CAUTION WILL CONSIDERABLY LESSEN THE RISK OF PERSONAL INJURY. 
HOWEVER, IF NORMAL SAFETY PRECAUTIONS ARE OVERLOOKED, OR 
IGNORED, PERSONAL INJURY TO THE OPERATOR, OR DAMAGE TO 
PROPERTY MAY RESULT.

Содержание 3400757













Отзывы: