Clarke 3120137, Инструкция по эксплуатации и обслуживанию

Страница: 3 / 16

3
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
GENERAL SAFETY RULES
WORK ENVIRONMENT
1. Keep the work area clean and tidy.
2. Dress appropriately - Do not wear loose clothing or jewellery. Tie long hair
out of the way.
3. Keep children and visitors away - Do not let children handle the tool.
4. Keep the air supply hose away from heat, oil and sharp edges.
5. Do not fit the tool to any stand or clamping device that may damage it.
USE
1. Stay alert and use common sense - do not operate this tool when you are
tired or under the influence of alcohol, drugs or medication.
2. Always wear eye protectors when using air tools. Eye protectors must
provide protection from flying particles from the front and the side.
3. Do not overreach - Keep proper footing and balance at all times.
4. Never use oxygen, CO2, combustible gasses, or any botled gas, as a
source of power for the grease gun. This product should only be used with
a suitably rated compressed air supply.
5. Do not connect the air supply hose with your finger on the trigger of the
gun.
6. Do not exceed the maximum pressure for the gun of 90 psi / 6.2 bar.
7. Check hoses for leaks or excessive wear before use, and ensure that all
connections are secure.
8. Do not use the tool for any other purpose than described in this manual.
9. Do not carry out any alterations or modifications to the tool.
10. Always disconnect from the air supply when:
• Performing any maintenance.
• The tool is not in use.
• The tool will be left unattended.
CAUTION: FAILURE TO FOLLOW THESE PRECAUTIONS COULD RESULT IN
PERSONAL INJURY, AND/OR DAMAGE TO PROPERTY.