3
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
GENERAL SAFETY RULES
WORK ENVIRONMENT
1. Keep the work area clean and tidy.
2. Dress appropriately -
DO NOT
wear loose clothing or jewellery. Tie long hair
out of the way.
3. Keep children and visitors away -
DO NOT
let children handle the tool.
4.
DO NOT
operate the tool where there are flammable liquids or gases.
PERSONAL SAFETY
1. Stay alert and use common sense - do not operate the air tool when you
are tired or under the influence of alcohol, drugs or medication.
2.
ALWAYS
wear eye protection when using the tool - This must provide
protection from flying particles from the front and the side.
3.
ALWAYS
wear ear protection when using the air tool.
4.
ALWAYS
wear a dust mask when operating this type of tool.
5.
DO NOT
overreach - Keep proper footing and balance at all times.
6.
Remove any wrench before turning the power tool on
. A wrench left
attached to a moving part of the power tool may result in personal injury.
USE OF AIR POWERED TOOLS
1.
NEVER
use oxygen, CO
2
, combustible gases or any type of bottled gas as a
source of power for the tool.
2.
DO NOT
connect the air supply hose with your finger on the trigger.
3.
DO NOT
exceed the maximum pressure for the tool of 90 psi / 6.2 bar.
4. Check hoses for leaks or worn condition before use, and ensure that all
connections are secure.
5.
DO NOT
use the tool for any other purpose than that described in this
manual.
6.
ALWAYS
keep the air supply hose away from heat, oil and sharp edges.
7.
DO NOT
fit the tool to any stand or clamping device that may damage it.
CAUTION: FAILURE TO FOLLOW THESE PRECAUTIONS COULD RESULT IN
PERSONAL INJURY, AND/OR DAMAGE TO PROPERTY.
Содержание 3110472
Страница 16: ......
