Clarke 3110400 Скачать руководство пользователя страница 7

Страница: 7 / 16

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

BEFORE USE

CONNECTING THE AIRLINE

NOTE:

Ensure the air supply is turned off.

1. If required, connect an in-line mini oiler to the tool.

• A mini oiler helps to prolong the life of the air tool. Read the

instructions supplied with the mini-oiler before use.

2. If a mini-oiler is not being used, insert a few drops of oil into the tool through

the air inlet before use.

3. Connect a suitable hose as shown.

4. Connect the other end of the hose

to the compressed air supply.

5. Turn on the air supply and check

for air leaks.

• Rectify any found before

proceeding. PTFE tape may be
useful for sealing threaded
connections.

Your air tool is now ready for use.

You can fit a whip hose with a quick fit coupling if required (available from
your Clarke dealer).

ACCESSORIES

A wide range of accessories is available including filter/regulators, lubricators,
high-pressure hoses (5 to 50 metres) etc.

• Contact your Clarke dealer or the Clarke International Service

Department for further information.

WARNING: COMPRESSED AIR CAN BE DANGEROUS. ENSURE THAT YOU
ARE FAMILIAR WITH ALL PRECAUTIONS RELATING TO THE USE OF AIR
COMPRESSORS AND A COMPRESSED AIR SUPPLY.

Содержание 3110400

















Результаты поиска

Содержание 3110400

Отзывы:

Похожие инструкции для 3110400

Бренды по названию

Популярные бренды

Clarke 3110400, Инструкция по эксплуатации и обслуживанию

Результаты поиска

Содержание 3110400

Отзывы:

Похожие инструкции для 3110400

Бренды по названию

Популярные бренды