10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
2. Once the pressure has been released, disconnect the air supply hose from
the nail gun. Slide the collar on the hose connector away from the nailer.
The hose will release and spring backwards.
3. Remove any nails remaining in the magazine of the nailer.
4. Store the nailer safely in its box in a dry, secure environment.
CLEARING A JAM
To clear a jammed nail proceed as follows:
1. Follow the compressor procedure to
switch off and release the air pressure.
2. Disconnect the air supply hose.
3. Pull the nail pusher back as far as
possible until the catch clicks into place.
4. Remove the nails from the magazine.
• The jammed nail should then release.
If the jammed nail does not release,
proceed as follows.
5. Remove the bolt indicated using the
hexagonal key supplied.
6. Remove the striker cover.
7. Remove the jammed nail using pliers or similar tool.
8. Replace the striker cover.
MAINTENANCE
LUBRICATION
To lubricate the internal components during operation, an air line lubricator
should be used.
If an air system oiler is not being used, lubricate the nail gun every 2 hours with
a few drops of air line oil, dripped into the air inlet.
Clarke Airline Oil is available from your CLARKE dealer part no. 3050825.
• Only use the oil provided to lubricate the nail gun.
WARNING: DISCONNECT THE NAIL GUN FROM THE COMPRESSED AIR
SUPPLY AND EMPTY THE MAGAZINE BEFORE PREFORMING ANY
MAINTENANCE.
Содержание 3110397
Страница 16: ......
