background image

8

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

TROUBLESHOOTING

BRAKE FLUID SAFETY

1. Dispose of waste liquids in accordance with local authority regulations.

2. Always read and comply with the warnings on the brake fluid container.

3. Wear eye protection and keep skin contact to a minimum. If brake fluid 

enters the eyes rinse with plenty of water and seek medical advice. If 
swallowed seek medical advice immediately.

BRAKE BLEEDING

NOTE:

Do not touch the vehicle’s brake pedal whilst bleeding the brakes with 
this extractor.

Refer to the vehicle manufacturers instructions before proceeding. If no 
specific instructions exist, follow the instructions detailed below.

1. Remove the brake fluid reservoir lid on the vehicle.

2. Fill the reservoir to its maximum mark.

Cause

Remedy

The extractor doesn't suck up 
any fluid.

1. Make sure the tube is fully inserted.

2. Has all of the fluid been removed.

3. Make sure that the extractor isn't full.

WARNING: BRAKE FLUID IS FLAMMABLE - KEEP AWAY FROM SOURCES OF 
IGNITION, INCLUDING HOT SURFACES E.G. EXHAUST MANIFOLD.

WARNING: BRAKE FLUID WILL DAMAGE PAINT WORK. ANY SPILLAGE 
SHOULD BE FLUSHED WITH WATER IMMEDIATELY.

WARNING: FAMILIARISE YOURSELF WITH THE HAZARDS OF BRAKE FLUID - 
READ MANUFACTURERS INSTRUCTIONS ON THE CONTAINER.

Содержание 1801928













Отзывы: