Clarke 12LST, Инструкция пользователя, Страница: 4 / 8

4
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
OPERATION
1. Unscrew the handle and pump
assembly in order to fill the
container with the desired liquid.
2. Screw the pump and handle
assembly back on firmly.
3. Release the carrying lugs from the
pump body by twisting the handle
anticlockwise.
4. Pressurise the container by
pumping the handle.
5. Squeeze the trigger to begin
spraying. When the spray
weakens, pump the handle to re-
pressurise the container.
6. Push the trigger forward to lock in
position & maintain a constant
spray without needing to hold the
trigger. Slide the trigger back to
release.
7. Adjust the width of the spray by
twisting the tip of the nozzle.
8. Pump the operating handle when necessary to maintain pressure.
• If leaks or poor delivery occurs, check the hose connections.
9. Push the pump handle downward and twist left or right to engage the
carrying lugs in the cap when lifting the unit.
10. When not in use, clip the spray lance to the side of the pulling handle.
11. If a hissing sound is heard from the
relief valve, the valve has
reached its operating limit and is
venting to prevent damage to
the sprayer.
12. At the end of spraying, relieve
tank air pressure by unscrewing
the relief valve.