- 2 - FORM NO. 70162B
Clarke
®
American Sanders
B-2 (CE) Operator's Manual
Operator Safety Instructions ......................................................... 3
Introduction and Machine Specifications ....................................... 5
Machine Set-Up ........................................................................... 6
How to Operate the Machine ........................................................ 8
Sanding Cuts and Sandpaper .................................................... 9
Maintenance .............................................................................. 10
The Dust Control System ...................................................... 10
How to Adjust the Angle of the Sandpaper Disc to the Floor .. 10
How to Change Adjustment of Machine ................................. 10
How to Clean Ventilation Plug ............................................... 10
Lubrication ............................................................................ 11
How to change the Lubricant in the Gearbox ......................... 11
How to Check the Carbon Brushes ....................................... 11
Assembly Drawing #1 ................................................................ 14
Assembly Parts List #1 .............................................................. 15
Assembly Drawing #2 ................................................................ 16
Assembly Parts List #2 .............................................................. 17
Wiring Diagram .......................................................................... 18
Contents of this Book
WARNING!
The Products sold with this Manual contain or may contain chemicals that are known to certain governments (such as the State of
California, as identified in its Proposition 65 Regulatory Warning Law) to cause cancer, birth defects or other reproductive harm. In
certain locations (including the State of California) purchasers of these Products that place them in service at an employment job site or a
publicly accessible space are required by regulation to make certain notices, warnings or disclosures regarding the chemicals that are or
may be contained in the Products at or about such work sites. It is the purchaser’s responsibility to know the content of, and to comply
with, any laws and regulations relating to the use of these Products in such environments. The Manufacturer disclaims any responsibility
to advise purchasers of any specific requirements that may be applicable to the use of the Products in such environments.
revised 5/10
Содержание 07097A
Страница 20: ......