Clarity XLC8, Руководство пользователя

Страница: 18 / 43

15
XLC 8
WIRELESS ENABLED FUNCTIONS
To use a wireless enabled cell phone with your XLC8 , you must first pair and
connect your cell phone(s) with the telephone base. All XLC8 and XLC8HS
handsets can be used to make or answer calls on the cell line. Your cell line is
the telephone line associated with your cell phone service.
W ireless enabled technology operates within a short range (a maximum of
approximately 30 feet). When you pair a wireless enabled cell phone to the
telephone base, place your wireless enabled cell phone closer to the
telephone base to maintain sufficient signal strength. For optimal
performance, keep your cell phone within 15 feet of the telephone base
while using the cell line.
PAIR AND CONNECT YOUR WIRELESS ENABLED CELLPHONE
1. Choose a slot to pair the cell phone. Press and hold PAIR 1 or PAIR 2 on the
telephone base until you hear a confirmation tone, and the PAIR 1 or PAIR
2 light flashes.
2. Turn on the pairing feature of your cell phone in the cell phone settings
menu . Once your cell phone finds your Clarity phone (Clarity XLC8 ), press
the appropriate key on your cell phone to continue the pairing process.
• Your cell phone may prompt you to enter the PIN of the telephone base.
The default PIN of the telephone base is 0000.
When the cell phone is connected to the telephone base, the
corresponding status icon ( PAIR 1 or PAIR 2) displays. The corresponding
device light ( PAIR 1 or PAIR 2) turns on.
If the pairing fails, turn off the feature on your cell phone and on the XLC8
by pressing PAIR 1 or PAIR 2. Then repeat the steps above to pair and
connect again. In some cases, it may take you a few attempts to complete
the pairing process.
PAIR AND CONNECT YOUR WIRELESS -ENABLED HEADSET
1. Press MENU on the phone when it is not in use. Press MENU again to select
Mobile Devices .
2. Press the UP or DOWN arrow keys to scroll to Add Headset, and then press
MENU. The screen displays Search headset….
3. Set your headset to discoverable mode. Once your handset finds your
headset, press MENU to select it.
• Enter the PIN of your headset if required. The PIN for most wireless
devices is 0000 (refer to the user’s manual of your headset), and then
press MENU.
When the headset is successfully paired and connected to the telephone
base, the PAIR 2 icon displays, and the PAIR 2 light on the base turns on.