background image

4

Clarity equipment is not field repairable.  Clarity
maintains service facilities in Roanoke, VA.  Should
repairs be necessary, attach a tag to the unit clearly
stating company name, address, phone number, contact
person, and the nature of the problem.  Send the unit to:

Clarity

Repair and Return Dept.

5614 Hollins Road

Roanoke, VA  24019-5056

TROUBLESHOOTING CHART

PROBLEM

POSSIBLE SOLUTION

No Output.

1.

Verity AC power is being supplied to the unit and the power switch is in the
"ON" position.

2.

Verity that input signal is present at amplifier connection.

3.

If speaker controller or equalizer is not being used, make sure that effects switch
is in the "OFF" position.

4.

Verity all speaker wiring (no opens, shorts, or grounds).

Distorted output.

1.

Check input wiring for proper polarity connections.

2.

Verify that speaker load does not exceed amplifier rating.

3.

Verify input signal does not exceed input voltage rating.

4.

Verify all speaker wiring (no opens, shorts, or grounds).

Override does not operate.

1.

Verify priority strap is installed.

2.

Verify input signal is at proper level.

LIMITED WARRANTY

Clarity

 warrants its products to be free from defects in materials and workmanship under conditions of normal use and service for a

period of one year from the date of shipment.  The obligation under this warranty shall be limited to the replacement, repair or refund of
any such defective device within the warranty period, provided that:

1.

Inspection by Clarity indicates the validity of the claim;

2.

The defect is not the result of damage, misuse, or negligence after  the original shipment;

3.

The product has not been in any way repaired by others and that factory sealed units are unopened (A service charge plus parts
and labor will be applied to units defaced or physically damaged);

4.

Freight charges for the return of products to Clarity are prepaid,

5.

All units “out of warranty” are subject to a service charge.  The service charge will cover minor repairs (Major repairs will be subject
to additional charges for parts and labor).

This warranty is in lieu of and excludes all other warranties, expressed or implied, and in no event shall Clarity be liable for
any anticipated profits, consequential damages, loss of time or other losses incurred by the buyer in connection with the
purchase, operation, or use of the product.

This warranty specifically excludes damage incurred in shipment.  In the event a product is received in damaged condition, the carrier
should be notified immediately.  Claims for such damage should be filed with the carrier involved in accordance with the F.O.B. point.

Содержание SMA-40






Отзывы: