background image

32

 33

CALLER ID DISPLAY (NETWORK DEPENDENT)

This product supports caller ID services offered by most telephone service 
providers. If you have subscribed to Caller ID service, and provided the 
identity of the caller is not withheld, the number of the caller will be displayed 
together with the date and time of the call (if provided by the network).

The telephone stores caller ID information about the last 50 incoming calls in 
the call log. Each entry may have up to 24 digits for the telephone number and 
15 characters for the name. Entries are stored in reverse chronological order. 
The telephone deletes the oldest entry when the log is full to make room for 
new calls. If you have more than one handset, this information is common to all 

If you answer a call before the information appears on the screen, it does not 
show in the caller ID history.

Note:  The caller ID information might not be available for every incoming call. 
The callers might intentionally block their names and/or telephone numbers.

Missed (new) calls indicator

When you have calls that have not been reviewed, the handset idle screen 
shows XX missed calls .
All entries that have not been reviewed are counted as missed (new) calls. 
Each time you review a caller ID history entry marked NEW, the number of 
missed calls decreases by one. If you do not want to review the missed (new) 
calls one by one, but you still want to keep them in the caller ID history, you 
can press and hold <TALK OFF/ CLEAR> for four seconds when the handset 
is idle. All the entries in the caller ID history are considered old (reviewed), 
and the missed calls message goes away. 

CALLER ID DISPLAY

Reasons for missing caller ID information

Screen 

message

Reason

Private name

The caller prefers not to show the name

Private number

The caller prefers not to show the telephone number.

Private caller

The caller prefers not to show the name and telephone number

Unknown name

Your telephone service provider cannot determine the caller’s name

U n k n o w n 
number

Your telephone service provider cannot determine the caller’s telephone 
number

Unknown caller

Your telephone service provider cannot determine the caller’s name and 
telephone  number.  Calls  from  other  countries  may  also  generate  this 
message.

View the Call Log Entries

caller’s name and number into your directory. Call log empty  appears if 
there are no records in the call log. When a handset is in idle mode, press 
<DOWN> to review the call log entries in reverse chronological order 
starting with the most recent call.

1.  Press <DOWN> to access the call log.

-OR-  

  Press <MENU/SELECT>, then <UP/DOWN> to select Call log

  Press <MENU/SELECT> twice to select Review .

2.  Press <UP/DOWN> to browse the call log entries.

Note: 

• 

 When reviewing an entry from the calls list, press KEY# repeatedly to 
display the number in a different format.

CALLER ID DISPLAY

Содержание D722



























Отзывы: