10
SPECIFICATIONS
PROBLEM
CAUSE
SOLUTION
No Sound
Static Sound
Sound is
distorted
Volume not turned up
Signal reception too low
Volume is too high
Adjust the car units main volume
knob
Adjust the antenna or move the
unit to a stronger signal location
The display shows
“No Signal”
No DAB coverage in your
area
Poor reception
Adjust the position of the aerial
The display is blank
This may occur if the
broadcaster changes the
label of a service or removes
a label while tuned.
the radio will try to retune
perform a scan
I can hear a burbling
noise on some stations.
Weak signal area
try re-positioning the aerial
Signal lost between car
radio and unit
Tuning drift in car radio
Check the transmission
frequency ( outlined on page 8).
To retune to a different frequency
see page 6.
TROUBLESHOOTING
SPECIFICATION
Frequency Range:
DAB Band III 174-240 MHz
FM transmit range:
87.6-107.9 MHz
Input connectors:
MCX antenna connector
Output connectors:
3.5mm stereo output for headphones
Controls
DAB/FM transmitter, menu, enter, down, up & scan
LCD display
2 rows x 16 characters
Power Supply
12-24V DC to 5V DC ( 500mA ) adaptor
CONTACT DETAILS
We trust you are completely satisfied with this product from Clarity Vision (Group) Ltd,
however please feel free to contact us if you experience any difficulties, or if you would like
to express your views regarding our products. Please write to:
Clarity Vision (Group) Ltd.
Grand Union Buildings
54 High Street
Weedon Bec
Northampton, NN7 4QD
United Kingdom
Telephone: 0871 226 8935
email: [email protected]
Through the process of continuous improvement, Clarity Vision (Group) Ltd reserves the
right to change or alter specifications without prior notice. E&OE
Содержание CDAB7-AUTO
Страница 1: ...CDAB7 AUTO DAB FMIN CARADAPTER ...
