8
Charging
A charger cradle designed to hold and charge the
brush handle is included. Simply place the
CLARISONIC
into the charger cradle with the brush facing the raised
wave of the charger. The green light will flash while the
CLARISONIC
is charging and will shine a constant
green when it is fully charged. It cannot be over-charged.
You can leave the
CLARISONIC
in the charger cradle,
or if you prefer, you can leave it out of the charger cradle
(for example, by the sink, tub or shower) as long as you
charge it after every 30 one-minute brushing cycles.
We recommend that you leave your
CLARISONIC
in its
charger cradle when not in use.
As an indication that the battery is low, the
CLARISONIC
will alert you that it needs to return to the charger by
beeping 5 times while the yellow and green lights flash
5 times. For your convenience, the
CLARISONIC
only
needs to be charged overnight after every 30 one-minute
brushing cycles and can be kept out of the charger
(for example, by the sink, tub or shower) until it needs
charging. If it is used for 30 or more one-minute cycles
without being charged, the brush handle will beep
immediately following the one-minute brushing cycle, to
alert you to place it in the cradle for charging.
9
push
down
pull
away
snap
3 pins
and 3
notches
.
.
.
a
n
d
t
w
i
s
t
.
.
.
a
n
d
tw
is
t
2
5
4
align
push
down
to
m
ount
1
3
to
re
m
ov
e
page
9
page
8
caring for your
clarisonic
To clean your
CLARISONIC
, we recommend that,
once a week, you wash the brush head and the handle
separately using warm soapy water to remove any
buildup of debris that may have accumulated.
Do not
attempt to open the brush handle to clean the
interior. To dry the bristles after use, rub the brush head
against a towel for
5-10
seconds while the
CLARISONIC
is powered on.
Do not
use abrasive cleaners or
chemicals to clean any part of the
CLARISONIC
.
Do not
put any part of the
CLARISONIC
in a dishwasher.
To clean the charger cradle, wipe with a soft, damp cloth.
Do not
immerse the charger cradle in water.
Replacement Brush Heads
We recommend that the
CLARISONIC
brush heads be
replaced every 90 days as the bristles become fatigued
and less effective over time. They can be purchased from
your physician or medi-spa or at www.clarisonic.com.
To remove
the brush head,
1
simply grip the brush
head firmly, then push and twist it counter-clockwise.
Then
2
pull the head away from the handle.
To mount
the brush head,
3
align the 3 notches
with the 3 pins, then
4
push down and twist the head
clockwise until it
5
snaps into place.
There are 2 types of brush heads offered to enhance
the comfort of your
CLARISONIC
experience. The brush
heads are offered in either Normal (gray plastic base) or
Sensitive (white plastic base) to match your skin type
and sensitivity. Both are included in the system kit and
are compatible with the
CLARISONIC
brush handle.
The brush heads can be purchased separately for
replacement use.
0152PBLuserguide.final6 3/17/05 6:53 PM Page 8