Clarion XAZ611, Руководство пользователя

Страница: 24 / 28

28
XAZ611
English
TA (Traffic Announcement)
In TA standby mode, when a traffic announcement
broadcast starts, the traffic announcement broad-
cast is received as top priority regardless of the
function mode. Traffic programme (TP) automatic
tuning is also possible.
∗
This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
DAB or RDS broadcast station being received has
traffic announcement programmes.
∗
For details on “TA”, refer to the section “RDS op-
eration” of each owner’s manual.
●
Setting TA standby mode
●
Cancelling TA standby mode
●
Searching for a TP station
Notes:
• If a TP station is not received, the main unit stops
the search operation.
• “TP” may be lit in the display when a TP broadcast
is transmitted from an RDS station. In this case,
press ISR button
9
to perform TP seek tuning.
Press ISR button
9
again to return to the previ-
ous mode.
INFO (Announcement)
In INFO standby mode, when the selected
announcement programme starts, the main unit
switches to the selected announcement
programme automatically.
●
Setting INFO standby mode
If you press and hold ISR button
9
for 1 second
or longer, “INFO” lights in the display and the main
unit is set into INFO standby mode until the se-
lected announcement is broadcast. When the
selected announcement broadcast starts, the
announcement item appears in the display. If you
press and hold ISR button
9
for 1 second or
longer while the selected announcement broad-
cast is being received, the selected announce-
ment broadcast reception is cancelled and the
main unit goes into INFO standby mode.
●
Cancelling INFO standby mode
To cancel INFO standby mode, press and hold
ISR button
9
for 1 second or longer.
Digital Radio / DAB Operations
●
Information select
This is a function for selecting INFORMATION
ON or OFF in Information interrupt mode.
You can set ON up to 6 information items.
You can select any of the 6 items below:
1. Perform the following operation depending on
the connected model.
Press and hold ADJ button
2
for 1 second or
longer.
2. Press the right or left SEARCH button
%
to
select “INFO SEL”, then push ENT button
#
to enter “INFO SEL” mode.
3. Press the right or left SEARCH button
%
to
select an information item. You can select any
of 6 items:
4. Perform the following operation depending on
the connected model.
Tur n the Rotar y knob
$
clockwise or
counterclock wise to set the information item
for ON or OFF.
5. Press ADJ button
2
to return to the previous
display.
PTY
This function enables you to listen to the selected
programme type, irrespective of the function mode.
∗
One common PTY can be selected for DAB or RDS.
∗
Of DAB PTY and RDS PTY, the PTY which is re-
ceived earlier takes priority over the other.
∗
PTY broadcasts are not yet available in all countries.
∗
In INFO standby mode, INFO stations have priority
over PTY stations.
∗
In TA standby mode, TP stations have priority over
PTY stations.
∗
For details on “PTY”, refer to the section “RDS
operation” of each owner’s manual.
●
Setting PTY standby mode
INFORMATION item
ENGLISH Contents
TRAVEL TRANSPORT FLASH
WARNING WARNING / SERVICE
NEWS NEWS FLASH
WEATHER AREA WEATHER FLASH
EVENT EVENT ANNOUNCEMENT
SPECIAL SPECIAL EVENT