Clarion VXZ646, Руководство пользователя

Страница: 11 / 46

VXZ646
13
English
8. OPERATIONS
Basic Operations
Note: Be sure to read this chapter referring to the front diagrams
of chapter “
4. CONTROLS ” on page 5 (unfold).
CAUTION
Be sure to lower the volume before switching
off the unit power or the ignition key. The unit
remembers its last volume setting. If you
switch the power off with the volume up,
when you switch the power back on, the
sudden loud volume may hurt your hearing
and damage the unit.
Turning on/off the power
Note:
• Be careful about using this unit for a long time
without running the engine. If you drain the car’s
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
1. Press the [ FNC ] button.
2. The illumination and display on the unit light
up. The unit automatically remembers its last
operation mode and will automatically switch
to display that mode.
3. Press and hold the [ FNC ] button for 1 second
or longer to turn off the power for the unit.
Note:
• System check
The first time this unit is turned on after the wire
connections are completed, it must be checked
what equipment is connected. When the power is
turned on, “
SYSTEM CHK ” and “ Push POWER ”
appear in the display alternately, so press the
[
FNC ] button. The system check starts within the
unit. When the system check is complete, press
the [
FNC ] button again.
Selecting a mode
1. Press the [ FNC ] button to change the
operation mode.
2. Each time you press the [ FNC ] button, the
operation mode changes in the following
order:
Radio mode
➜
DVD mode
➜
CD changer
mode
➜
DVD changer mode
➜
TV mode
➜
AUX mode
➜
Radio mode...
∗
External equipment not connected with
CeNET is not displayed.
Adjusting the volume
Turning the [ ROTARY ] knob clockwise increases
the volume; turning it counterclockwise
decreases the volume.
∗
The volume level is from 0 (minimum) to 33
(maximum).
Switching the display
Press the [ DISP ] button to select the desired
display.
Each time you press the [ DISP ] button, the
display switches in the following order:
Main display
➜
Clock display
➜
Main display ...
∗
Once selected, the preferred display becomes
the display default. When a function
adjustment such as volume is made, the
screen will momentarily switch to that
function’s display, then revert back to the
preferred display several seconds after the
adjustment.
Setting the Z-Enhancer Plus
This unit are provided with 4 types of sound tone
effects stored in memory. Select the one you
prefer.
∗
The factory default setting is “ Z+ OFF ”.
Each time you press the [ Z+ ] button, the tone
effect changes in the following order:
“
Z+ OFF ”
➜
“ BASS BOOST ”
➜
“ IMPACT ”
➜
“ EXCITE ”
➜
“ CUSTOM ”
➜
“ Z+ OFF ”...
• BASS BOOST : bass emphasized
• IMPACT : bass and treble emphasized
• EXCITE : bass and treble emphasized mid de-
emphasized
• CUSTOM : user custom
• Z+ OFF : no sound effect