14 VX215A
English
Owner’s Manual
Radio Mode Operations
Storing Preset Memory
1. Preset Channel Buttons.
2. Cancel Button.
1. REG Button.
2. PTY Seek Button.
3. AF Button.
4. PTY Selection Button.
5. TA Button.
6. PTY Button.
7. PTY List.
8. Page Down Button.
9. Page Up Button.
10. Return Button.
Preset memory function can store up to 24 stations: Six sta-
tions each for FM1, FM2, FM3 and AM.
Note:
The present memory will be reset a few hours after disconnecting the
vehicle battery.
1. Press the [FM1/FM2/FM3/AM] button to select the de-
sired band.
2. Press the
/
button to tune into a desired station.
3. Press the
SAVE
button to store the current frequency.
4. Press the
CANCEL
button to cancel the storing process.
5. Press one of the 6 [PRESET] buttons to store the current
station into the preset memory. The tab controls display
will return to the previous layout.
Recalling a Preset Station
1. Press the
PRESET
button to select the PRESET Tab. The
tab controls will change accordingly.
2. A total of 24 preset positions (6-FM1, 6-FM2, 6-FM3,
6-AM) exists to store individual radio stations in memory.
Pressing the corresponding [PRESET] button recalls the
stored radio frequency automatically.
Storing Preset Memory
Press the
RDS
button to select the RDS Tab. The tab con-
trols will change accordingly.
This unit has a built-in RDS decoder system that supports
broadcast stations transmitting RDS data.
This system can display the name of the broadcast station
being received (PS) and can automatically switch to the
broadcast station with the best reception as you move long
distances (AF switching).
Also, if a traffic announcement or programme type is broad
-
cast from an RDS station, no matter what mode you are in,
this broadcast is received. Additionally, if EON information
is received, this information enables automatic switching of
other preset stations on the same network and interruption
of the station being received with traffic information from oth
-
er stations (TP). This function is not available in some areas.
When using the RDS function, always set the radio to FM
mode.
The RDS feature consists of:
AF : Alternative Frequency
PS : Programme Service Name
PTY : Programme Type
EON : Enhanced Other Network
TP : Traffic Programme
TA : Traffic Announcement
* RDS interrupt does not function during AM radio reception.
* When set receives RDS signal, and can read PS data, PS appears
in the display.
8. RDS OPERATIONS
Hex_VX215A_OM.indd 14
6/30/15 2:04 PM
