VS715
STAND ALONE DIGITAL MEDIA PLAYER
14
•
Most DVD video disc will automatically start playback by
displaying the DVD’s Main Menu on-screen. Some DVD
discs may automatically start playback from the first
chapter.
•
When playing back a double-sided DVD video disc, insert
the disc with the top side up. Play it back in its entirety,
then take out the disc and turn it over to play the second
side. (The top and back side of a DVD video disc are
marked differently on different discs.)
•
Dirt or dust on the data surface may generate read errors.
Wipe the disc with a soft cloth before insertion. If errors
still occur, remove the disc.
2. Press the EJECT button on the front of the VS715 faceplate
or the EJ button on the IR Remote Control.
NOTE: If the disc is ejected and not removed, the VS715 will
automatically retract the disc back into the player after 15 sec-
onds. (8-cm disc media are not retracked back into the player.)
Playing Back DVD Disc Media
1. Press the PLAY button on the IR Remote Control.
•
If the DVD’s Main Menu is displayed, select Play in the
DVD’s Main Menu using the JOG buttons then press
ENTER on the IR Remote Control.
NOTE: If the power button or the ignition is shut off, the DVD will
resume play at the exact spot where playback was interrupted.
Stopping DVD Playback
1. Press the STOP button on the IR Remote Control.
•
Once the STOP button is pressed, playback will resume
from the first chapter of the DVD when the PLAY button
is pressed again.
Pausing Playback
1. Press the PAUSE button on the IR Remote Control. Press
the PAUSE button again or PLAY button to resume nor-
mal playback.
Slow Preview and Slow Review
1. Press the SLOW PREVIEW button on the IR Remote
Control to advance frames at 1/7th normal speed forward.
Press the button multiple times to choose 1/6, 1/5, 1/4.
1/3 or 1/2 normal playback mode.
•
The sound is muted during Slow Preview.
•
Some buttons are not available depending on the DVD.
VS715OMRev0.qxd 1/25/01 4:19 PM Page 14
