- 3 -
VRX935VD
pin 39: REM 5V
: O : Power ON signal output to the 5V supply
circuit.
pin 40: ID CONTINUE
: O : ID check.
pin 41: DVD R DE INT : IN : The interrupt signal input from the DVD
ROM decoder.
pin 42: NU
: - : Not in use.
pin 43: DVD R DE RST: O : The reset signal output to the DVD ROM
decoder.
pin 44: VCC
: - : Positive supply voltage.
pin 45: D 0
:I/O: Data input/output.
pin 46: D 1
:I/O: Data input/output.
pin 47: D 2
:I/O: Data input/output.
pin 48: D 3
:I/O: Data input/output.
pin 49: D 4
:I/O: Data input/output.
pin 50: D 5
:I/O: Data input/output.
pin 51: D 6
:I/O: Data input/output.
pin 52: D 7
:I/O: Data input/output.
pin 53: TEST 4
: O : For the test.
pin 54: TEST 5
: O : For the test.
pin 55: TEST 6
: O : For the test.
pin 56: TEST 7
: O : For the test.
pin 57: TEST 8
:I/O: For the test.
pin 58: TEST 9
:I/O: For the test.
pin 59: TEST 10
:I/O: For the test.
pin 60: TEST 11
:I/O: For the test.
pin 61: CNNCT VCC
: IN : Connect to VCC.
pin 62: GND
: - : Ground.
pin 63: VCC
: - : Positive supply voltage.
pin 64: BUSY OUT
: O : Busy flag output.
pin 65: DISC
: O : Disc distinction signal output.
pin 66: LAYER
: O : Layer distinction signal output.
pin 67: NU
: - : Not in use.
pin 68: CHUKING
: IN : The chucking switch signal input.
pin 69: DVD MCH S 1 : IN : The sensor signal input from DVD mech-
anism.
pin 70: DVD MCH S 2 : IN : The sensor signal input from DVD mech-
anism.
pin 71: DVD MCH S 3 : IN : The sensor signal input from DVD mech-
anism.
pin 72: NU
: - : Not in use.
pin 73: NU
: - : Not in use.
pin 74: NU
: - : Not in use.
pin 75: NU
: - : Not in use.
pin 76: MA
: O : MA.
pin 77: NU
: - : Not in use.
pin 78: NU
: - : Not in use.
pin 79: NU
: - : Not in use.
pin 80: AD 7
: O : Address output.
pin 81: AD 6
: O : Address output.
pin 82: AD 5
: O : Address output.
pin 83: AD 4
: O : Address output.
pin 84: AD 3
: O : Address output.
pin 85: AD 2
: O : Address output.
pin 86: AD 1
: O : Address output.
pin 87: AD 0
: O : Address output.
pin 88: RD STRB
: O : The read strobe output.
pin 89: WR STRB
: O : The write strobe output.
pin 90: NU
: - : Not in use.
pin 91: GND
: - : Ground.
pin 92: TEST 12
: IN : For the test.
pin 93: TEST 13
: IN : For the test.
pin 94: TEST 14
: IN : For the test.
pin 95: TEST 15
: IN : For the test.
pin 96: TEST 16
: IN : For the test.
pin 97: TEST 17
: IN : For the test.
pin 98: LIMIT SNC
: IN : The inside limit signal input from the
mechanism.
pin 99: NU
: - : Not in use.
pin100: Vref H
: - : Reference voltage.
052-6058-01
MR27V802D-65TP
8M bit One Time PROM
1.Terminal Description
pin
1: NU
: - : Not in use.
pin
2: A 18
: IN : The address input.
pin
3: A 17
: IN : The address input.
pin
4: A 7
: IN : The address input.
pin
5: A 6
: IN : The address input.
pin
6: A 5
: IN : The address input.
pin
7: A 4
: IN : The address input.
pin
8: A 3
: IN : The address input.
pin
9: A 2
: IN : The address input.
pin 10: A 1
: IN : The address input.
pin 11: A 0
: IN : The address input.
pin 12: Chip enable
: IN : Chip enable signal input.
pin 13: VSS
: - : Ground.
pin 14: Output enable
: IN : Output enable signal input.
pin 15: D 0
: O : The data output.
pin 16: D 8
: O : The data output.
pin 17: D 1
: O : The data output.
pin 18: D 9
: O : The data output.
pin 19: D 2
: O : The data output.
pin 20: D 10
: O : The data output.
pin 21: D 3
: O : The data output.
pin 22: D 11
: O : The data output.
pin 23: VCC
: - : Positive supply voltage.
pin 24: D 4
: O : The data output.
pin 25: D 12
: O : The data output.
pin 26: D 5
: O : The data output.
pin 27: D 13
: O : The data output.
pin 28: D 6
: O : The data output.
pin 29: D 14
: O : The data output.
pin 30: D 7
: O : The data output.
pin 31: D 15 / A -1
:I/O: The data output. / The address input.
pin 32: VSS
: - : Ground.
pin 33: BYTE
: IN : 8bit/16bit selection.
pin 34: A 16
: IN : The address input.
pin 35: A 15
: IN : The address input.
pin 36: A 14
: IN : The address input.
pin 37: A 13
: IN : The address input.
pin 38: A 12
: IN : The address input.
pin 39: A 11
: IN : The address input.
pin 40: A 10
: IN : The address input.
pin 41: A 9
: IN : The address input.
pin 42: A 8
: IN : The address input.
pin 43: NU
: - : Not in use.
pin 44: NU
: - : Not in use.
052-7062-05
uPD703037AGF-A16-3BA Main Display Controller
1.Terminal Description
pin
1: NU
: - : Not in use.
pin
2: ESS CK
: IN : The clock pulse input from DVD Signal
Processor.
pin
3: ESS RST
: O : The reset pulse output to DVD Signal
Processor.
pin
4: DVD ACC ON
: O : DVD ACC ON.
pin
5: DVD EJECT
: O : DVD EJECT.
pin
6: TP RX
: IN : The serial data input from the touch pan-
el.
pin
7: TP TX
: O : The serial data output to the touch pan-
el.
pin
8: TP REQ
: IN : The request signal from the touch panel.
pin
9: VDD
: - : Positive supply voltage.
pin 10: VSS
: - : Negative supply voltage.
pin 11: TP RST
: O : The reset pulse output to the touch pan-
el.
pin 12: BEEP
: O : Beep out.
pin 13: DVD 8V DET
: IN : DVD 8V detection.
pin 14: KS IN 0
: IN : Key scan input.
pin 15: KS IN 1
: IN : Key scan input.
pin 16: IRI
: IN : The remote control signal input.
pin 17: KS IN 2
: IN : Key scan input.
pin 18: KS IN 3
: IN : Key scan input.
pin 19: KS OUT 0
: O : Key scan output.
pin 20: KS OUT 1
: O : Key scan output.
pin 21: FLASH PRG
: IN : The flash memory program command in-
put.
pin 22: KS OUT 2
: O : Key scan output.
pin 23: GREEN
: O : Signal output for the LED.
pin 24: AMBER
: O : Signal output for the LED.
pin 25: BLINK LED
: O : Signal output for the LED.
pin 26: IE RX
: IN : IE-Bus serial data intput.
pin 27: IE TX
: O : IE-Bus serial data output.
pin 28: EEP DI
: IN : The serial data input from EEP-ROM.
pin 29: EEP DO
: O : The serial data output to EEP-ROM.
