40
VRX653R
English
Owner
’s manual
Other Functions
Setting the car speaker output for
the cellular phone
∗
The factory default setting is “
RIGHT
”.
∗
To output the telephone calls, set the cellular
phone interrupt to ON.
1. Press the ADJ button
*
to switch to the
adjustment selection display.
2. Operate the JOYSTICK
¡
upward or
downward to select “
TEL SP
”. “
LEFT
” and
“
RIGHT
” are displayed in the menu bar.
●
LEFT:
Telephone calls can be heard on the left
speaker connected to this unit.
●
RIGHT:
Telephone calls can be heard on the right
speaker connected to this unit.
3. Operate the JOYSTICK
¡
rightward or
leftward to select a desired mode, and then
press the ENT at the center of the
JOYSTICK
¡
to set it.
4. Press the ADJ button
*
again to return to
the STANDARD display.
3. Press the TITLE button
(
again to return to
the STANDARD display.
Cellular phone interrupt setting
If you connect this unit and your cellular phone
with a separately sold cable, you can listen to
your telephone calls on your car speakers.
∗
The factory default setting is “
OFF
”.
1. Press the ADJ button
*
to switch to the
adjustment selection display.
2. Operate the JOYSTICK
¡
upward or
downward to select out of “
TEL SW
”, “
ON
”,
“
OFF
”, and “
MUTE
”, which are displayed in
the menu bar.
●
OFF:
This unit continues normal operation even
when the cellular phone is used.
Note:
• When the setting is OFF, disconnect the
cellular phone from the cable or turn off the
power of the cellular phone.
●
ON:
You can listen to your telephone calls from
the speakers connected to this unit.
∗
When listening to your calls on your car
speakers, you can adjust the volume by
operating the VOLUME button
2
.
●
MUTE:
The sound from this unit is muted during
telephone calls.
3. Operate the JOYSTICK
¡
rightward or
leftward to select a desired mode, and then
press the ENT at center of the JOYSTICK
¡
to set it.
4. Press the ADJ button
*
again to return to
the STANDARD display.
