Clarion VMA543, Руководство пользователя

Страница: 19 / 24

VMA5
43
and VMA7
43
19
5. TROUBLESHOOTING
The system does not work
A fuse may be blown. Replace the external fuse with a fuse of
the same value.
The power wires may not be connected. Check the wiring
connections and retest.
No picture.
Press
SOURCE
to make sure the proper input is selected.
If there is still no picture, press
PICTURE
. If the menu appears,
check the source unit and video connections. If no menu
appears, check all fuses and power connections to the monitor
and the associated equipment.
Note:
The monitor has an operating temperature range of
-1
o
C to 45
o
C (30
o
F - 113
o
F). If the temperature is outside
this operating range, the unit will not turn on, or the screen
may be slow to react to image changes. The monitor will
function normally once it returns to its proper operating
range.
With a DVD player and a widescreen DVD disc, there are
black bars above and below the picture.
Change the TV display mode to “Wide” in the DVD player’s
Setup menu.
After changing this setting, if there are still black bars, press
WIDE
on the front panel of the monitor and select WIDE.
The screen is dark
The brightness is set too low. Press
PICTURE
and adjust the
BRIGHT option.
The interior of the vehicle is too hot or too cold. The monitor’s
operating temperature is -1 degree to 45 degrees Celsius (30
degrees to 113 degrees Fahrenheit).
Picture “rolls.”
Check that the VIDEOSYS setting is correct for the monitors
and DVDs being used (see “
Changing the Video Output
Mode
”). PAL video often “rolls” on NTSC monitors.