manualshive.com logo in svg

Clarion UNGO ProSecurity SR5000, Руководство пользователя

Поделиться
Скачать
Clarion UNGO ProSecurity SR5000 Скачать руководство пользователя страница 20

17

Page Recognition Mode

The transceiver will leave a zone icon illuminated when it has

received a triggered response and will wait for violation recogni-

tion. To clear the LCD information and alarm page alerts, turn

the ignition on and then off

u

ussiin

ng

g  yyo

ou

urr  ssyysstte

em

m  

active arming

Press 

for one second to arm the system. The vehicle’s lights

will flash once, the doors will lock, the siren will chirp once, and

while the system is armed, the status LED will blink approxi-

mately once per second to indicate the system is actively

protecting the vehicle.

The transceiver will beep once (or vibrate). The arm icon (29)

will appear and remain displayed on the LCD.

Open Zone Notification

If the siren chirps again, the transceiver beeps again, and the

status LED blinks in a pattern, a protected entry or sensor input

is active and its icon will be displayed on the transceiver LCD.

This is called open zone notification. Refer to the 

Diagnostic

section of this manual for further information.

➜

Содержание UNGO ProSecurity SR5000





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды