Clarion Ungo Pro Security K10, Руководство пользователя, Страница: 11 / 19

8
disabling the system without a remote
If your remote is lost or damaged, you can manually override the sys-
tem. To do this, you must have the vehicle's ignition key and know
where the Override switch is located. Be sure to check with the installer
for the location of the Override switch.
To disarm the security system,
turn the ignition to the ON
position. Press and release the
Override switch within 10 sec-
onds. The status LED will stop
flashing and the vehicle should
start. If the vehicle does not
start, you may have waited too
long; turn the ignition off and
repeat the process.
Location of Override Switch _________________________________
silent arm/disarm
To temporarily turn off the arm or disarm chirps, use Silent Arm/Disarm.
Simply press for less than one second before arming or disarming,
and the confirmation chirp(s) will be eliminated for that one operation
only. If you want the arm/disarm chirps turned off permanently, your
dealer can do this for you.
DRW-35