Clarion UNGO MS2105, Руководство пользователя

Страница: 9 / 16

9
4. Continue holding the Valet/Override button for 3 seconds.
5. Turn the ignition Off.
• The siren will chirp once.
• The LED will turn On solid indicating the system is in Valet mode.
To exit Valet Mode:
1. Press and hold the Valet/Override button down.
2. Turn the ignition On.
3. Hold the Valet/Override button for 3 seconds.
4. Turn the ignition Off.
• The siren will chirp twice.
• The LED will turn off indicating the system is out of Valet mode.
4.13 Optional Trunk Release
Press the Trunk button for approximately 3 seconds to open the trunk. This optional
feature may require additional parts and labor, consult your Authorized Ungo dealer for
more information.
4.14 Optional Trunk Disarm Feature
The trunk disarm feature allows the alarm to disarm automatically when the Trunk
button is used to activate the optional trunk release. This eliminates having to disarm
the alarm system prior to activating the trunk release. This optional feature may require
additional parts and labor, consult your Authorized Ungo dealer for more information.
4.15 Programming 1-way (standard) Remote Transmitters
Make sure to have the desired transmitters ready and follow the steps below.
To program transmitters:
1. Turn the ignition ON.
2. Press and hold the Valet/Override switch for 5 seconds.
• The siren will chirp once.
3. Press the Lock button on the transmitter.
• The siren will chirp once.
4. Press the Lock button on the transmitter again.
• The siren will chirp twice.
5. Repeat steps 3 and 4 for each additional transmitter.
6. Turn OFF the ignition when transmitter programming is complete.
• The siren will chirp 3 times.
MS2105 owner.qxd 8/25/2003 4:21 PM Page 9