Page 4 - MS2005 Owner’s Manual
Remote Arming
When Armed, the system monitors and protects 3 independent areas, or
zones
, including the
doors, hood/trunk, and shock sensor.
To Arm the system:
1. Turn off the ignition.
2. Press Button 1.
• The siren/horn will chirp once.*
• The doors will lock.
• The parking lights will flash once.
• The LED will turn on red, indicating the doors, hood and trunk inputs are activated.
* The siren chirp(s) during Arming will alert you the condition of the system and vehicle when the system is armed.
1 chirp
=
normal arming
1 + 4 chirps
=
door, hood, or trunk open
During Arming, if the system detects a bad sensor or an open zone, the system will ignore that input, but keep all
other areas protected.
3. After 10 seconds:
• The LED will begin blinking, indicating that the shock sensor is activated.
While the system is
Armed
, the system will trigger if:
• The doors are opened.
• The shock sensor detects an impact to the vehicle.
• The hood or trunk is opened.
When triggered, the siren will sound, and the parking lights will flash and the horn will honk
(if connected). If the system is triggered by the doors, hood, or trunk, the system will alarm
for 40 seconds. If triggered by the shock sensor, the system will alarm for 20 seconds.
If the same input triggers the system 3 times during a single arming cycle, the system will
bypass that input keeping the other zones protected until the next time the system is armed.
If the shock sensor detects a light impact to the car, the siren will sound 5 chirps to warn
away the potential intruder.
Remote Disarming
To Disarm the system:
Press Button 2.
• The siren/horn will chirp twice.*
• The doors will unlock.**
• The parking lights will flash twice.*
• The LED will turn off.
Security Features
MS2005BO.QXD 6/27/2002 2:25 PM Page 4
