background image

English

Owner

’s

 manual

TB741P/TB742P/TB743W

5

3. This unit uses a precision mechanism. Even

in the event that trouble arises, never open
the case, disassemble the unit, or lubricate
the rotating parts.

4. TV broadcast reception

When receiving TV broadcasts, the strength
of the signals changes since the car is
moving, so in some cases it may not be
possible to receive clear pictures.

TV signals are strongly linear, so
reception is affected by buildings,
mountains, and other obstacles.

Such external factors as electric train
lines, high voltage lines, and signal
devices may disturb the picture or cause
noise.

If the reception is poor, switch to a station
with good reception.

CHANGES OR MODIFICATIONS TO THIS
PRODUCT NOT APPROVED BY THE
MANUFACTURER WILL VOID THE WAR-
RANTY.

For your safety, the driver should not watch
the TV or operate the controls while driving.
Please note that watching and operating the
TV while driving is prohibited by law in
some countries. Also, while driving, keep
the volume to a level at which external
sounds can be heard.

1. When the inside of the car is very cold and

the player is used soon after switching on
the heater, moisture may form on the disc or
the optical parts of the player and proper
playback may not be possible. If moisture
forms on the disc, wipe it off with a soft cloth.
If moisture forms on the optical parts of the
player, do not use the player for about one
hour and the condensation will disappear
naturally to allow normal operation.

2. Driving on extremely bumpy roads which

cause severe vibration may cause the sound
to skip.

CAUTION

3. PRECAUTIONS

Содержание TB741P































Отзывы: