Clarion PJ-4604T, Инструкция по эксплуатации

Страница: 11 / 27

11
English
Sound Setup
You can adjust a sound effect or tone
quality to your preference.
1. Press [ ] button.
2. Then press [
x
] or [
v
] button to
select the sound setup item:
G-EQ *1
※
BASS *2 TREB *2
BAL FAD INTEL-TUNE
※
LOUD
Notes:
*1 This item can be performed only when
the system item “ EQ-SELECT ” is set to
“ G EQ ”(page 13).
*2 These items can be performed only
when the system item “ EQ-SELECT ” is
set to “ BASS/TREB ”(page 13).
※
You should press [ ROTARY ] knob to
adjust the setting for these items.
• G-EQ (Graphic Equalizer) : select
the desired audio effect in preset
memory
• BAL (Balance): balance of the right
and left speakers
• FAD (Fader): balance of the rear and
front speakers
• INTEL- TUNE (Intelligent Tune):
Clarion’s sound technology
developed for turning the car interior
into a wonderful listening environment
• LOUD (Loudness): bass or treble
emphasized
3. Turn [ ROTARY ] knob to adjust the
value.
• G-EQ : detailed operations are below
• BASS / TREB : -15 ~ +15 (default: 0)
• BAL : L7 ~ R7 (default: 0)
• FAD : R7 ~ F7 (default: 0)
• INTEL- TUNE : detailed operations
are below
• LOUD: ON/OFF (default: OFF)
4. After completing settings, press [ ]
button to return to the previous mode.
Notes:
• During “ BASS/TREB/BAL/FAD ” setup, if
no operation is performed for more than
10 seconds, this mode can be stored in
memory and return to the previous mode.
Setting Graphic Equalizer
This unit is provided with 9 types of sound
quality effects stored in memory.
Select the one you prefer.
∗
The factory default setting is “ OFF ”.
1. Select “ G-EQ ” in audio items, and press
[
ROTARY
] knob.
2. Turn [ ROTARY ] knob, select a tone
effect.
OFF CUSTOM BASS BOOST
HIGH BOOST VOCAL
IMPACT
NATURAL USER 1 USER 2
USER 3
• OFF : flat
• CUSTOM: user custom temporarily
• BASS BOOST : bass emphasized
• HIGH BOOST : mid and treble
emphasized
• VOCAL : mid emphasized
• IMPACT : bass and treble emphasized
• NATUAL : calm and moist
• USER 1/2/3 : user custom
Setting preferred sound quality effects
1. Select “BASS BOOST/HIGH BOOST/
VOCAL/IMPACT/NATURAL/USER
1/USER 2/USER 3”
, and press
[ ROTARY ] knob.
2. Press [ x ] or [ v ] button to select a
frequency.
3. Turn [ ROTARY ] knob to change the
setting: –6 ~ +6
4. Long press [ 1 ]~[ 3 ] button to store the
setting into “USER 1” ~ “USER 3”
memory.
Note:
• If you do not perform storing as step 4
when you select “ BASS BOOST/HIGH
BOOST/VOCAL/IMPACT/NATURAL ” ,
the setting will be stored in “ CUSTOM ”
temporarily.