Clarion NX509, Руководство пользователя и инструкция по установке

Страница: 39 / 69

37
NX509
English
Owner
’s ma
nua
l
Messages displayed during
reception
The following messages are displayed when the
satellite radio cannot be received normally.
●
Sirius:
• When a channel is being tuned in or no signal
is received: “ ACQUIRING SIGNAL ”
• A channel without a broadcast has been
selected: “ INVALID CHANNEL ”
• A channel not covered by your contract: “ CALL
888-539-SIRIUS TO SUBSCRIBE ”
• When the tuner is turned on the first time or
after a reset: “ UPDATING CHANNELS ”
• When your contract is expired:
“ SUBSCRIPTION UPDATED ”
• When the Sirius antenna is not connected
correctly : “ ANTENNA ERROR ”
●
XM:
• When a channel is being tuned in (no signal is
yet received): “ LOADING ”
• A channel without a broadcast has been
selected: “ CHANNEL NOT AVAILABLE ”
• A channel not covered by your contract:
“ CHANNEL NOT AUTHORIZED ”
• When a channel is out of air time: “ CHANNEL
OFF AIR ”
• When no signal is received: “ NO SIGNAL ”
• When the XM antenna is not connected
correctly : “ CHECK ANTENNA ”
Note:
• The messages may vary depending on the XM
tuners connected to this unit.
❏
Selecting a band
1. Touch the [ Band ] key to select a band.
This changes the reception band as follows:
• Sirius: SR1
➜
SR2
➜
SR3
➜
SR1 ...
• XM: XM1
➜
XM2
➜
XM3
➜
XM1 ...
❏
Confirming your Radio ID
●
Sirius
1. Touch the [ Options ] key to display the
Options screen.
Your Sirius ID (12-digit number) will be
displayed.
2. To return to the previous screen, touch the
[ Back ] key.
●
XM
1. Touch the [ Direct ] key to display the Key Pad
screen.
2. Touch the [ 0 ] key, then touch the [ ENT ] key.
Receiving the Channel “ 0 ” will display your
Radio ID (8-digit number).
❏
Tuning in a station
Only channels that can be received are selected.
Channels without broadcasts and channels not
covered by the contract will be skipped.
1. Touch the [
{
(Channel)] or [
}
(Channel)]
key.
The system will tune to the previous or next
available channel.
• Holding the key continues to seek channels.
❏
Selecting a station with the
channel number
1. Touch the [ Direct ] key to display the Key Pad
screen.
2. Enter the channel number of your desired
station by touching the [ 0 ] to [ 9 ] keys.
• If you enter a wrong number, you can
cancel it by touching the [ BS ] key.
• To return to the previous screen, touch the
[ Back ] key.
3. Touch the [ ENT ] key.
The radio channel you entered will be tuned.
❏
Displaying the channel name
and other information
1. Touch the [ Preset Info ] key when the Preset
keys are displayed.
The channel name, category name, and other
information are displayed.
• When the information displayed is longer
than 16 characters, touching the text scrolls
the entire text.
2. To return to the Preset Key screen, touch the
[ Preset Info ] key again.