Clarion NX405E, Руководство пользователя

Страница: 9 / 153

8 NX405E
English
English
Owner’
s Manual
English
3. CAUTIONS ON HANDLING
Operation Panel
For a longer service life, be sure to read the following cautions.
• The operation panel will operate properly in a
temperature range of 0˚ to 60˚ C.
• Do not allow any liquids on the set from drinks,
umbrellas etc. Doing so may damage the internal
circuitry.
• Do not disassemble or modify the set in any way.
Doing so may result in damage.
• Subjecting the operation panel to shocks may result in
breakage, deformation or other damage.
• Do not let cigarettes burn the display.
• If a problem should occur, have the set inspected at
your store of purchase.
• The remote control unit may not work if the remote
control sensor is exposed to direct sunlight.
• In extremely cold weather, the display movement may
slow down and the display may darken, but this is not
a malfunction. The display will work normally when the
temperature increases.
• Small black and shiny spots inside the liquid crystal
panel are normal for LCD products.
USB Port
• The USB memory sticks must be recognized as “USB
mass storage class” to work properly. Some models
may not operate correctly.
When the memorized data is lost or damaged by
any chance, Clarion shall not be liable for any
damage.
• When using an USB memory stick, we recommend
that you backup your data stored on it before by using
a personal computer etc.
• Data files may be broken when using USB memory
sticks in the following situation:
When disconnecting the USB memory stick or turning
the power off during writing or reading data. When
affected by static electricity or electric noise. Connect/
disconnect the USB memory stick when it is not
accessed.
• Connecting with the computer is not supported.
• Connecting with the USB Hub is not supported.
Cleaning
• Cleaning the cabinet
• Use a soft, dry cloth and gently wipe off the dirt. For
tough dirt, apply some neutral detergent diluted in
water to a soft cloth, wipe off the dirt gently, then wipe
again with a dry cloth.
Do not use benzene, thinner, car cleaner, etc., as
these substances may damage the cabinet or cause
the paint to peel. Also, leaving rubber or plastic
products in contact with the cabinet for long periods of
time may cause stains.
• Cleaning the liquid crystal panel
The liquid crystal panel tends to collect dust, so wipe
it off occasionally with a soft cloth. The surface is
easily scratched, so do not rub it with hard objects.