NP400 9
English
Owner’
s
Manual
Display menu, jump to main menu
Display map in 3D view
Select current panned position, after
panning map.
Information about current location on the
map, mode items
Select (check) currently highlighted item
Display spell mode
Page up, page down in displayed list
Step up or step down on menu list
Voice instractions are activated
Reset button
Cancel button
Delete button (Move cell content to Trash
can)
Route to home address
1. Touch the
Home Address button on the screen. If the
home address is not set previously, the following screen
will be displayed.
. Press the check key to display home address set up
screen.
3. Select one of the option on the screen to set the
address. Once the address is set, it will be saved in the
software memory.
4. If the home address was saved previously, the screen
with address will pop up, after you touched the
Home
Address button. Start your route.
Select the destination
To select the destination press
Go To... button on Main
Menu screen. The
Go To... screen is displayed.
To start your navigation use one of these modes:
Address or Intersection, Point of Interest,
Favorites, History.
