Clarion MC-12X, Инструкция для владельца и по установке

Страница: 20 / 52

24
VRX835
English
Owner
’s
manual
VISUAL Operations
This function is available when a VTR, etc. is
connected to the visual 1 or visual 2 terminal.
∗
The visual 1 mode is not available when a DVD
changer is connected to the visual 1.
●
“BRIGHT”:
Adjust the brightness of the display.
●
“HUE”:
Adjust the tone of color (red is emphasized
or green is emphasized)
●
“COLOR”:
Adjust the color saturation.
3. Operate the touch key to adjust a level.
●
“BRIGHT”:
[ – ] key or [ + ] key
●
“HUE”:
[ R ] key or [ G ] key
●
“COLOR”:
[ – ] key or [ + ] key
4. When adjustment is made, touch the [ RTN ]
key to return to the ADJ MENU display.
Touch the [ RTN ] key again to return to the
STANDARD display.
∗
To return from the adjust a level display to the
STANDARD display, press the [
ADJ ] button
once again.
Changing over monitor display size
∗
This function is available only when the panel is
open.
Notes:
• This function is not available while you are driv-
ing.
• Switch to the VTR/TV/DVD video/DVD changer
mode you see.
1. Press the [ DISP ] button to change over the
monitor display size. Each time you press
the [
DISP ] button, the monitor display size
changes in the following order:
“NORMAL”
➜
“WIDE”
➜
“F. WIDE”
➜
“CINEMA”
➜
“NORMAL”
●
“NORMAL”: (normal display)
There is a black area at both right and left
ends of a display. In case of normal TV
broadcasting (4:3), the image can be shown
without being cut or deformed.
●
“WIDE”: (wide mode)
The image at right and left ends in a display
elongates horizontally.
●
“F. WIDE”: (full wide mode)
The whole image elongates horizontally.
●
“CINEMA”: (cinema mode)
The image at both top and bottom in a dis-
play disappears.
WARNING
For your safety, the driver should not watch
the VTR, etc. or operate the controls while
driving. Please note that watching and op-
erating the VTR, etc. while driving are pro-
hibited by law in some countries.
Switching to the VISUAL mode
Note:
• For your safety, the VRX835 has a safety function
which turns off the picture when the car is mov-
ing, so only the audio can be heard. The picture
can only be watched when the car is stopped and
the parking break is applied.
1. Press the [ FUNC ] buton and select the VI-
SUAL mode.
2. Press the [ BAND ] button to select the VI-
SUAL1 or VISUAL2.
Switching the VTR system between
NTSC and PAL
∗
This function is enabled only when the panel is
open.
Switch to the VTR/DVD video/DVD changer
mode you use.
1. Press the [ ADJ ] button to switch to the ad-
justment selection display.
2. Touch the [
z
] key to select “ VTR N/P ”.
Touch the [ VTR N/P ] key, [ NTSC ] key and
[ PAL ] key appears in the display.
3. Touch the [ NTSC ] key or [ PAL ] key to select
“ NTSC ” or “ PAL ”.
Adjusting the brightness and tone of color
Notes:
• This operation is available only when the car is
stopped and the parking brake is applied.
• This function is not available when the display is
stored.
• The HUE setting can be adjusted only when the
NTSC mode is selected.
• Switch to the VTR/TV/DVD video/DVD changer
mode you see.
1. Press the [ ADJ ] button to switch to the ad-
justment selection display.
2. Touch the [ MONI ADJ ] key to display
[ BRIGHT ], [ HUE ] and [ COLOR ] key. Touch
the [ BRIGHT ], [ HUE ] and [ COLOR ] key to
adjust BRIGHT, HUE and COLOR.