12
DXZ848RMC
English
6. OPERATIONS
Basic Operations
Note:
Be sure to read this chapter referring to the front diagrams of
chapter “
2. CONTROLS
” on page 5 (unfold).
CAUTION
Be sure to lower the volume before switch-
ing off the unit power or the ignition key. The
unit remembers its last volume setting. If you
switch the power off with the volume up,
when you switch the power back on, the sud-
den loud volume may hurt your hearing and
damage the unit.
Turning on/off the power
Note:
• Be careful about using this unit for a long time
without running the engine. If you drain the car’s
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
1. Press the [
FNC
] button.
2. The illumination and display on the unit light
up. The unit automatically remembers its last
operation mode and will automatically switch
to display that mode.
3. Press and hold the [
FNC
] button for 1 second
or longer to turn off the power for the unit.
Note:
• System check
The first time this unit is turned on after the wire
connections are completed, it must be checked
what equipment is connected. When the power is
turned on, “
SYSTEM CHCK
” and “
Push POWER
”
appear in the display alternately, so press the
[
FNC
] button. The system check starts within the
unit. When the system check is complete, press
the [
FNC
] button again.
Selecting a mode
1. Press the [
FNC
] button to change the opera-
tion mode.
2. Each time you press the [
FNC
] button, the op-
eration mode changes in the following order:
Radio mode
➜
DAB mode
➜
CD/MP3 mode
➜
M.CATCHER mode
➜
CD changer mode
➜
DVD changer mode
➜
TV mode
➜
AUX
mode
➜
Radio mode...
∗
External equipment not connected with
CeNET is not displayed.
Adjusting the volume
1. Press the front part of the [
ROTARY
] knob.
The knob will pop up.
2. Turning the [
ROTARY
] knob clockwise in-
creases the volume; turning it counterclock-
wise decreases the volume.
∗
The volume level is from 0 (minimum) to 33
(maximum).
Switching the display
1. Press the [
D
] button to select the desired dis-
play.
2. Each time you press the [
D
] button, the dis-
play switches in the following order:
Main display
➜
Clock (CT) display
➜
Main
display
∗
Once selected, the preferred display becomes
the display default. When a function adjust-
ment such as volume is made, the screen will
momentarily switch to that function’s display,
then revert back to the preferred display sev-
eral seconds after the adjustment.
∗
For information on how to enter a title, refer to
the subsection “
Entering titles
” in section
“
Operations Common to Each Mode
”.
CT (Clock Time) function
The CT function receives CT data sent from an
RDS station and displays the time. Press the [
D
]
button to switch to the CT display.
∗
If a CT data is not being received, “
CT––:––
” ap-
pears in the display.
Note:
• CT data is not transmitted in some countries and
by some broadcast stations. Also, in some areas,
the CT may not display accurately.
Setting MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust
the low sound area like the normal sound ad-
justment function, but emphasizes the deep
bass sound area to provide you with a dynamic
sound.
∗
The factory default setting is off.
1. Press and hold the [
A-M
] button for 1 second
or longer to turn on the MAGNA BASS EX-
TEND effect. “
M-B EX
” lights in the display.
