Clarion DXZ778RUSB, Руководство пользователя

Страница: 13 / 51

Basic Operations
English
13
DXZ778RUSB
Adjusting Sound Mode
●
Adjusting the subwoofer output
volume
You can adjust the volume output from the unit’s
subwoofer output terminal.
“ S-W VOLUME ” can be adjusted only when
“ SUB WOOFER ” is set to “ ST ” or “ MONO ”
(page 20).
2-1. Select the “ S-W VOLUME ”.
3-1. Push the [ P.CH ] button upward or
downward to change the output volume.
∗
The factory default setting is “ 0 ”.
(Setting range: +6 to –6)
●
Setting the Digital Z-Enhancer
This unit are provided with 3 types of sound
tone effects stored in memory. Select the one
you prefer.
∗
The factory default setting is “ DZE OFF ”.
2-1. Select the “ DZE ”.
3-1. Press the [ ] button.
3-2. Push the [ SEEK PANEL ] leftward or
rightward to select the tone effect. Each
time you push the [
SEEK PANEL ], the tone
effect changes in the following order:
“ DZE OFF ”
↔
“ DZE 1 ”
↔
“ DZE 2 ”
↔
“ DZE
3 ”
DZE OFF : No sound effect
DZE 1 : Suitable for genuine speakers
DZE 2 : Suitable for separate
speakers
DZE 3 : Suitable for co-axial speakers
3-3. When the “ DZE 1 ”, “ DZE 2 ” or “ DZE 3 ” is
set, push the [ P.CH ] button upward or
downward to change the DZE level from +3
to –3.
∗
The factory default setting is “ 0 ”.
To change sound mode
1. Press the [ ] button and select the sound
mode to adjust.
2. Push the [ SEEK PANEL ] leftward or
rightward to select the “item name”.
When speaker system is “ NORMAL ”:
“ S-W VOLUME ”
↔
“ DZE ”
↔
“ P.EQ ”
↔
“ BASS”
↔
“TREBLE”
↔
“S RESTORER”
↔
“HPF”
↔
“S-W LPF”
↔
“BALANCE”
↔
“FADER”
When speaker system is “3WAY”:
“S-W VOLUME”
↔
“DZE”
↔
“P.EQ”
↔
“BASS”
↔
“TREBLE”
↔
“S RESTORER”
↔
“BALANCE”
When speaker system is “2WAY”:
“DZE”
↔
“P.EQ”
↔
“BASS”
↔
“TREBLE”
↔
“S RESTORER”
↔
“BALANCE”
↔
“FADER”
3. Push the [P.CH] button upward or
downward to select the “desired setting
value”.
∗
In the case of item names appearing with
the “ENT” suffix after the item name, the
[ ] button must be pressed to display
the setting value.
∗
“P.EQ” can be adjusted only when the
“P.EQ ON/OFF” is set to “ON” (page 20)
and “EQ SELECT” is set to “P.EQ” (page
20).
∗
“BASS” and “TREBLE” can be adjusted
only when “DZE” is set to “DZE OFF” (page
13) and “EQ SELECT” is set to “B/T” (page
20).
∗
After completing settings, press the
[ ]
button to return to the previous mode.
Note:
• During sound adjustment mode, if no operation
is performed for more than 10 seconds, this
mode can be canceled and return to the
previous mode.
DXZ778RUSB_EN.book 13 ページ ２００６年１２月２６日 火曜日 午後２時２５分